RTK GPS with Controller and Post Processing Software (1Base+ 2 Rover) Manufacturer,Supplier and Exporter in USA
Product Code : EL-CELE-11723
Lss America is a leading RTK GPS with Controller and Post Processing Software (1Base+ 2 Rover) Manufacturer,and suppliers in USA, RTK GPS with Controller and Post Processing Software (1Base+ 2 Rover) Manufacturer,and suppliers in South Africa.RTK GPS with Controller and Post Processing Software (1Base+ 2 Rover) Suppliers in Mozambique,RTK GPS with Controller and Post Processing Software (1Base+ 2 Rover) A quality product from Engineering Lab Equipments ideal for use in School Laboratories in developing countries of Asia, Africa and South Africa in Supplier Kenya, Southern African region, Botswana, Lesotho, Malawi, Angola, Namibia, Zambia, Zimbabwe. Djibouti, Ethiopia,Madagascar, Mauritius, Rwanda, Seychelles, Tanzania and Uganda.
Item Code: “LSA129/069”
DESCRIPTION: -
• Brand: Topcon
• Model: To be mentioned by the bidder.
• Country of origin: Japan
• Country of Manufacture/Assemble: Japan
GNSS technology:
• Receiver must be Geodetic Survey Grade.
• It is capable of working in Static, Rapid Static, RTK mode as reference & rover.
• It is capable of receiving Network RTK and GNSS global correction service like Trimble Center Point RTX, Leica Smart Link and Atlas Correction services.
• Static and rapid static: Horizontal: 3 mm+0.5 ppm (RMS) Vertical: 5 mm+0.5 ppm (RMS), On the Fly (OTF) Initialization,
• Initialization Reliability: Better than 99.99%
• Time for Initialization: Typically, ˂ 10 sec, Hardware.
Environmental specifications:
• Temperature: Operating: -400c to +650c, Storage: -400c to +750c
• Humidity: 100%, condensing,
• Proof against: Water, sand and dust: IP67 or latest dustproof, protected against temporary submersion into water (depth 1m)
• Drops: Withstands topple over from a 2 m pole drop onto hard surfaces,
• Power & Electrical Supply voltage: 10 to 28 V DC external power input with over-voltage protection.
• Internal power supply: Rechargeable & removable Lithium-Ion battery
• Operating times on internal battery: Minimum 7 h receiving (Rx) data with internal radio, 5 h transmitting (Tx) data with internal radio, 6 h Rx/Tx data continuous RTK operation via GSM/GPRS Connection, Tilt sensor: E-Bubble with IMU
• Radio Modem: Fully integrated, receive and transmit.
• Radio modem: Receive & Transmit UHF Radio Modem
• Frequency: 410-470 MHz,
• Channel spacing: minimum 12.5 KHz.
• Range: Minimum 3 Km in urban environment.
• Communication protocols: Real-Time data formats for data transmission and reception: CMR, CMR+, RTCM 2.1, RTCM 2.2, RTCM 2.3, RTCM 3.0, RTCM 3.1, RTCM 3.2, NMEA 0183, Controller Type: Touch sensitive controllers,
• Display: WVGA or better color 5'' Display would be color with a very good visibility in broad daylight,
• Operating System: Android 6.0 / Windows Mobile 6.0 or higher
• Graphical Display: Controller would be capable of creating complete points, Lines and Polygons in the field which will be displayed graphically on the screen.
• Processor & Memory: 1 GB RAM, 2 GB Internal Flash and USB 2.0 Pen drive slot or higher.
• Processor speed 1GHz or higher
• Power Battery: Lithium-ion battery,
• Operating time: Minimum 8 hours,
• Communication: Bluetooth, Wi-Fi and GSM (Dual sim),
• Dust and Waterproof: IP68 or latest,
• Accessories:
• Data Controller with range pole bracket,
• carrying case and all standard accessories: Would be same manufacturer as GNSS receiver.
• Tripod: Wooden/Aluminum folding tripod with protected cap, would be same manufacturer as GNSS receiver.
• Tribrach: Would be same manufacturer as GNSS receiver.
• Antenna mounting adaptor: Would be same manufacturer as GNSS receiver.
• Antenna pole with circular level and Pole holder (Pole tripod): Would be same manufacturer as GNSS receiver, Minimum 2(two) meters long.
• Capable of minimum 7 hours continuous RTK operation via GSM/GPRS connection with one battery.
• Battery Charger with adaptor: Input voltage: AC220V ±15%
• Recharging time: 4 hours (maximum Cables & Connectors: All kinds of necessary cables & connectors would be supplied including data downloading cables and card reader.
• Carrying case: Hard-shell carrying case. Would be same manufacturer as GNSS receiver.
• Manuals/ User guide: Each hardware set must include all the original manuals/user reference guide.
• Warranty: Minimum 01 (One) Year warranty by the manufacturer and supplier must be provided for the all-supplied items
• Demonstration: A one day demonstration must be provided using same model of receiver covering all the operational mode before getting work order. GNSS